Author Topic: PIC18F45K50 Dev Board  (Read 427 times)

0 Members and 1 Guest are viewing this topic.

Offline Luis EstradaTopic starter

  • Contributor
  • Posts: 11
  • Country: us
PIC18F45K50 Dev Board
« on: July 25, 2020, 10:53:22 pm »
Hello All,

My name is Luis, I am brand new to the eevlog forum, and I was looking to have y'all look over my design of a PIC18F development board. I have been working on this project for about 9 months with mixed success, I have designed 5 different prototype PCB's and only two have worked :/ . Below I attached my latest design, I look forward to your critique.

PCB Info:

- Made with KiCad
- Two layer board



Luis
 

Offline NivagSwerdna

  • Super Contributor
  • ***
  • Posts: 2507
  • Country: gb
Re: PIC18F45K50 Dev Board
« Reply #1 on: July 25, 2020, 11:13:25 pm »
Hi Luis,

Well I like the PICKIT3 edge connector, nicely laid out and a 90 degree header would work well.

I would change the USB-A for Micro USB-B

Also... if you can just go for SMD components; it's so much easier once you get the hang of it.

Welcome!
Nivag
 

Offline Luis EstradaTopic starter

  • Contributor
  • Posts: 11
  • Country: us
Re: PIC18F45K50 Dev Board
« Reply #2 on: July 25, 2020, 11:18:04 pm »
Thank you! For the feed back!

Luis
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf