EEVblog Electronics Community Forum

Electronics => Projects, Designs, and Technical Stuff => Topic started by: john23 on November 23, 2024, 07:57:30 pm

Title: pin order of routing a chip from the opposite layer
Post by: john23 on November 23, 2024, 07:57:30 pm

Hello,I need to bias a chip from the opposite part of the chip.
How the pin order of the chip changes with respect the top layer when i put the chip on the opposite layer as shown below?
Thanks.
https://www.minicircuits.com/pdfs/PMA5-83-2W+.pdf (https://www.minicircuits.com/pdfs/PMA5-83-2W+.pdf)