| Electronics > Projects, Designs, and Technical Stuff |
| Power up multiple motherboards from a single PSU? |
| (1/1) |
| olkipukki:
I have a few vintage MBs that I would like stack up and "encapsulate" into a custom build enclosure. The main issue is a space and would prefer to avoid 1:1 (MB:PSU) ration. The most MB setups consume in 150-300W range. I'm no planning to power these up altogether, max 2 at the same time. The whole thing should allows connect 8 MBs (yes, like eight as number ::)) My idea is marrying a prefabricated industrial 48V ~600W PSU (aka TDK Lambda etc) and layout a custom board that fit an enclosure nicely. Key points: - cabling are okay to make in house - access to a proper components unrestricted - my pet project: no budget constraints, but reasonable Any suggestions? |
| Navigation |
| Message Index |