Electronics > Projects, Designs, and Technical Stuff
Powering by 1*AA battery
<< < (3/3)
Kasper:
+1 for Mariush.
Never trust the specs on the first page of the datasheet. A boost regulator will probably not deliver its max current when fed with its min voltage.

If you find a regulator that can boost from 1V to 3V and output >200mA, let me know.
ogden:

--- Quote from: Nauris on December 14, 2018, 04:06:55 pm ---There are also microcontrollers that work straight from AA battery voltages, for example Lapis ML610 series work down to 1.1 V.

--- End quote ---

Right. There's MSP430L092 going down to 0.9V (w/o booster) as well. AFAIK this is one chip out of whole msp430 family with such voltage specs.
Navigation
Message Index
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod