Electronics > Projects, Designs, and Technical Stuff

project: extending HP3478A functionality

<< < (53/54) > >>

ysg2k6:

--- Quote from: Miti on December 29, 2022, 11:46:22 pm ---Thanks Kirill, it works now but I see those issues as well and my laptop is I7  ;D.
If I set it to fast, beside lagging behind the instrument, I see something that looks like burst reading. It updates fast a number of times and then it freezes for half a second or so. This happens with AR488 as well.

--- End quote ---

may I invite you and @kirill_ka to test the modified HP3478A PC software? the full credit is owned by the original author(https://github.com/Niravk1997/HP-3478A-Software)

unzip the attached .exe file and replace the one on your disk.

selevo:
Hi all!
Can anyone tell how to use tcl? I didn't find any documentation. My multimeter does not have a display (cracked) . I want to read readings using a computer and this adapter (hp3478aext)
https://github.com/KIrill-ka/hp3478ext/tree/master/tcl

kirill_ka:
Hi Selevo,
Are you targeting some automated measurements or just want to see the readings?

yo0:
Hello, will be implemented the to do list?

especially the dBm function :)

/*
 TODO list

 - Display 0 with O?
 - Implement unbuffered binary write TUD using escape-sequence as stop
 - Implement unbuffered binary read TUD using escape-sequence as stop
 - Save & restore "ext" functions using presets.
 - Add dBm measurements in ACV.
 */

/*


Best regards

Pio

kirill_ka:

--- Quote from: yo0 on November 17, 2023, 10:47:45 pm ---Hello, will be implemented the to do list?

especially the dBm function :)

--- End quote ---

Hi,
Do you think the world is ready for it?
Ok, I'd add it by the end of 2023 ;)


--- Quote from: yo0 on November 17, 2023, 10:47:45 pm --- - Save & restore "ext" functions using presets.

--- End quote ---
That was done already by the way. I forgot to remove it from the list.

Navigation

[0] Message Index

[#] Next page

[*] Previous page