Electronics > Projects, Designs, and Technical Stuff
Project help Needed Please, portable electronics circuit, DIY multimeter
(1/1)
projecthelp:
Hello all,

I am a college student from the UK and as part of my course i have to do a project, I have been given a project to do which is to Design a portable electronics circuit that can be used for training.  It must be;
Able to measure current, voltage and resistance.
Operate on 10 Volts DC, but plugged into the mains. (You will need to rectify and transform it down.)
Have a maximum of 5 resistors that can be in series, parallel and complex.
I have a tight budget and any help would be welcome,
Thanks
themadhippy:
One  idea,reply  to the questions asked by people trying to answer your questions the first time you posted exactly the same thing.
coromonadalix:
A cheap multimeter could be based on icl 7106 or icl 7107   ic's    3 1/2 digits,  tons of schematics on the web
Navigation
Message Index
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod