Electronics > Projects, Designs, and Technical Stuff
PSU CV CI Howland
(1/1)
iMo:
This is follow up of the topic Zero999 has started here:
https://www.eevblog.com/forum/beginners/0-30v-0-3a-psu-audiogurus-version/msg2240139/#msg2240139
It is a pretty interesting schematics, needs some elaboration however, therefore let us continue here.
The voltage and current could be set via DACs easily.
iMo:
And the ADI stability test (with lower values in dividers).
iMo:
Transient with switching Rload 10ohm/1ohm, Cload made of 3 capacitors, Vout=15V, current limit=2A, OP27.
iMo:
Stability with OP27. A perfect oscillator. Phase margin close to 0deg.
Interestingly in transient with the Iload switching 1.5A/15A there are no oscillation visible. Hmm.
iMo:
Constant load 5ohm, switching Vset 0.5/2.0V for Vout 5V/20V while I_limit is 2A. Nice, except a small transient at the rising edge of the Vout and I(R_Load).
Navigation
[0] Message Index
Go to full version