Electronics > Projects, Designs, and Technical Stuff
R.A.E Thyristors
<< < (3/3)
13:
Hello,

Update:
My friend and I tested the SCRs with a 15 kJ capacitor bank. They worked well exceeding their specs (whoops). I have attached a picture of the resulting current waveform. To limit the di/dt a 4.2 uH inductor was used in addition to a 20 mOhm load. To trigger the SCR a pulse transformer with a 5 volt, 1.5 amp pulse was used. The current peaked around 35,000 amps.
Navigation
Message Index
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod