Electronics > Projects, Designs, and Technical Stuff
R.A.E Thyristors
13:
Hello,
Update:
My friend and I tested the SCRs with a 15 kJ capacitor bank. They worked well exceeding their specs (whoops). I have attached a picture of the resulting current waveform. To limit the di/dt a 4.2 uH inductor was used in addition to a 20 mOhm load. To trigger the SCR a pulse transformer with a 5 volt, 1.5 amp pulse was used. The current peaked around 35,000 amps.
Navigation
[0] Message Index
[*] Previous page
Go to full version