Electronics > Projects, Designs, and Technical Stuff

Radio science fair project for 4th grader?

(1/2) > >>

John_ITIC:
It is time again for science fair and my son has become old enough to show an interest in electronics! This year, he wanted to do something related to Radio. Can anyone recommend a very small kit that he can build himself and that is actually easy enough to understand for a 9 year old (with a good chunk of help from his EE Dad, of course)?

Essentially, this: http://www.education.com/science-fair/article/build-basic-radio/

rdl:
Elenco has a variety of pretty good educational radio kits. They have good manuals that not only tell you how to build it, but also explain how it works.

http://www.elenco.com/product/productlist/radio_kits=MTc=


sycho123321:
Hi, it is awesome that your son is getting interested in electronics!  :D
Here is a very simple 2 transistor 40m cw (morse code) transciver that you can buy as a kit. http://www.al7fs.us/AL7FS2.html that is a link talking about the circuit, and here is the link to the kit http://www.halted.com/commerce/ccp13844-enhanced-pixie2e-qrp-cw-transceiver-kit-pixie2e-kit240.htm but you can also get very inexpensive chinese knockoff kits such as this one http://www.ebay.com/itm/like/321745589972?ul_noapp=true&chn=ps&lpid=82.
I bought one of the cheap knockoffs and it is essentially the same as the genuine one.
I hope this helps!
Lukas

Ian.M:
One can go all the way from a simple crystal set to a transistorised TRF radio capable of driving a small speaker.  Way back in the 70's Ladybird Books Ltd published a book on building a radio from scratch targeting children old enough to use simple hand tools.

See: http://www.mds975.co.uk/Content/trfradios02.html
and http://www.amazon.com/Making-Transistor-Radio-G-C-Dobbs/dp/0721403247

The baseboard should be kiln dried white pine or similar.  Rule out the layout using a Biro, not a pencil as you don't want conductive leakage paths.  Saturating the baseboard with paraffin wax using a white candle and a hot air gun after marking it out and drilling the pilot holes but before fitting any of the screws improves reliability.   The cup washers must be brass or heavily brass plated, but the screws can be ordinary steel woodscrews as they aren't in contact with the actual component leads.

The parts used are rather retro, but can still be obtained from specialist dealers, or you could modify the design and re-bias it to use silicon transistors.  Use modern AA batteries in a holder.

I've still got mine on the shelf from all those years ago. I rebuilt it in my early teens with a Vernier reduction dial on the tuning cap, and a plug-in Denco coil to tune some of the shortwave bands.  I remounted the original AM ferrite rod on a coil base so I could also use it on the MW band.  Its got a pop-riveted aluminium angle frame screwed to the corners of the baseboard holding the aluminium front and side panels, and if you dont look inside, you wouldn't realise it was built Ladybird style!  However its not currently working - I suspect due to oxidisation of some of the component leads.

For the basic crystal set, you do need a good aerial and earth, but the final reflex TRF set is sensitive enough to get local stations without an external aerial.

vk3yedotcom:
Ideally you'd want something that can be taken to school and demonstrated.  That rules out crystal sets (and other simple receivers) due to the need for an outdoor antenna.

A simple FM bug transmitter is fun and would appeal to kids who like bugging people, hearing themselves on the radio, broadcasting funny noises or playing DJ.

 http://www.talkingelectronics.com/projects/Spy%20Circuits/SpyCircuits-1.html has some ideas.

A 2 transistor FM bug can be extremely sensitive and have a good range.  Get extra points for putting the microphone on a long lead and the transmitter on a long pole above the roof.  Add a 3.5mm plug to allow audio from a computer etc to be broadcast.

A relay connected in a latching / buzzer circuit is a very simple spark transmitter that could be heard on an AM radio.

Another possibility, and one that doesn't involve soldering, is something with 433 MHz modules and solderless breadboard.

Super regenerative FM receivers are also fun and don't need an antenna.  They don't use many parts but can be tricky to get going.  Like a bug they can interfere with other's reception.  Maybe for an older age group? 

Navigation

[0] Message Index

[#] Next page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod