Electronics > Projects, Designs, and Technical Stuff
Recommendation on cheapist benchtop microscope for PCB inspection?
<< < (3/5) > >>
rhb:
I bought an Amscope binocular, but found it uncomfortable.  I suggest one of these:

https://www.ebay.com/itm/4-3in-LCD-1000X-Desktop-8-LED-Digital-Microscope-Endoscope-5MP-Camera-hk-f-g/232984501083

I have one of these:

https://www.ebay.com/itm/1000X-Digital-Microscope-Camera-Video-720p-with-4-3-LCD-Screen-8-Led-Holder/153241317556

which I modified to put the screen at a more comfortable angle.  Actual magnification is 5-30x which is what you need for PCB work.
akowalczyk:
I know a few people who have AmScopes, they work pretty well, but you can also snag a great used microscope on ebay if you look around.

I ended up buying a StereoZoom 4 microscope head on a really nice adjustable stand


Got some new eyepieces from Amscope, just need to work on a light ring and eye cups and it'll be all set.
jfiresto:

--- Quote from: akowalczyk on March 13, 2019, 01:30:52 am ---... I ended up buying a StereoZoom 4 microscope head on a really nice adjustable stand....
--- End quote ---

I like the stand and the dual (coarse/fine?) focus controls. How much room does it give you from the center of the field of view to the lower rack? You could make a short platform, level with the top of the foot, to accommodate bigger boards.

I only have 9 cm from the center of the FOV to my stand's vertical rear post. I am working on a short swivel arm to add another 15 cm and a bit of articulation. I may be able to get a few minutes on a high pressure water jet to cut the material.
akowalczyk:

--- Quote from: jfiresto on March 13, 2019, 07:56:40 pm ---
How much room does it give you from the center of the field of view to the lower rack? You could make a short platform, level with the top of the foot, to accommodate bigger boards.

--- End quote ---

It's about 5.5cm from the closest part of the base, but 16cm if you rest a board on top of the stand.


--- Quote from: jfiresto on March 13, 2019, 07:56:40 pm ---
 I am working on a short swivel arm to add another 15 cm and a bit of articulation. I may be able to get a few minutes on a high pressure water jet to cut the material.

--- End quote ---

Sounds like a neat project!
ali_asadzadeh:
Use your smart phone with this app "Magnifier Camera"

https://play.google.com/store/apps/details?id=com.jkfantasy.camera.jkpmagnifiercamera&hl=en

It's free and can do a very good job at that price :)
Navigation
Message Index
Next page
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod