Electronics > Projects, Designs, and Technical Stuff

Replacement for TIP36 transistor

(1/1)

IconicPCB:
The replacement issue is not too difficult to resolve however I am looking for a TIP36 like transistor with a lower beta than tip36.

In fact I am presently using  TIP36 however I am looking for similarly specced transistor with a beta of 15 to 20 at collector current of 10 amps.

BD250 seems like a suitable candidate unfortunately it is obsolete.

EDIT: obsolete according to some suppliers , element14 claims 600 odd pieces world wide.
Element14 offers a Multicomp device which is different to some older sources... back to square one.

Cliff Matthews:
Alltransistors.com is helpful. Search on TIP36, > 'find substitute', > search again results (after changing parameters desired).
Here is similar devices, (without limiting results to a TO218 case) scroll down - there's a big list. - Hope that helps!

radix:
Why wouldn't you just put a resistor across the BE junction?

oPossum:
On Semi MJW21194

https://www.onsemi.com/pub/Collateral/MJW21193-D.PDF

IconicPCB:
That is wha I have done. Effectively a 2.5 ohm resistor did the trick.

Navigation

[0] Message Index

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod