0 Members and 1 Guest are viewing this topic.
Another thought was to de-laminate the two glass sections to see if I could generate the schematic that way. I only have one display and don't want to ruin my chance of mapping this one.
Hi Dave,No, I've tried, but can't quite see the traces regardless of the angle, lighting, etc.
The display is driven by a PIC with a built-in LCD controller. I don't have the source code for the PIC so can't go about it that way. The product that uses this display has been in production for years and there is no chance of altering the LCD's pinout at this point or changing the firmware.