Electronics > Projects, Designs, and Technical Stuff
RF PNP transistor
<< < (3/3)
T3sl4co1l:
Phil Hobbs is fond of cascoding two of them, afraid I forget which though.  One of them has awful Early effect (or the FET equivalent), so that goes on the bottom; the other doesn't, but has awful low frequency noise, so goes on the top.  Yes, the layout must be tight and usually demands a small ferrite bead on the base/gate, which must be carefully chosen since you still want some high frequencies, not just lower ones.

Tim
Navigation
Message Index
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod