Electronics > Projects, Designs, and Technical Stuff

RGB to Component (YPbPr / YCbCr) Video Converter

<< < (4/4)


--- Quote from: paul_g_787 on June 15, 2021, 09:12:09 am ---This could be a good way to cut the cost! Do you have any values for the components in the schematic?

--- End quote ---

Try with 2k2 for the two emitter resistors and 22...47k for the base resistor. The circuit is pretty uncritical, for transistors use what you have in the box, eg, BC547/557.
The base resistor will give you a slight DC offset, choose one of the circuits depending on which direction you can accept the DC.


--- Quote from: paul_g_787 on June 15, 2021, 09:00:58 am ---I am not trying to capture and record video, I am trying to display RGBs video on my new TV which only has component YPbPr / YCbCr video inputs so I can play my old games consoles.

--- End quote ---
If it has a VGA input, have you tried making an adapter cable?

Which modern TV has VGA input? I haven't seen one. HDMI, yes.


[0] Message Index

[*] Previous page

There was an error while thanking
Go to full version