EEVblog Electronics Community Forum
Electronics => Projects, Designs, and Technical Stuff => Topic started by: ezalys on November 05, 2024, 01:46:22 am
-
Does anyone know where I can find a receptacle for this screw lock DIN connector? It’s off an LVDT gage.
-
I can't be sure about the size, but it looks like an Amphenol C091 series connector. Mouser has them. I didn't see them at Digikey.
-
I think this the company
https://uk.rs-online.com/web/c/connectors/circular-connectors/din-connectors/?applied-dimensions=4294431159
-
I can't be sure about the size, but it looks like an Amphenol C091 series connector. Mouser has them. I didn't see them at Digikey.
Digikey has them, not sure why you’d think they don’t: https://www.digikey.ch/short/rzvpntr5 (https://www.digikey.ch/short/rzvpntr5)
-
Does anyone know where I can find a receptacle for this screw lock DIN connector? It’s off an LVDT gage.
- Amphenol series C091 A and D (C091 B is bayonet-lock)
- Binder series 680 and 723
- Lumberg series 03
- Hirschmann MAB series
-
Are C091 A and D compatible?
-
Yes. The datasheet says on both of them that they are “screw locking according to IEC 61067-2-106” which is the relevant standard.
They’re just IP40 and IP67 versions of the same thing.