Electronics > Projects, Designs, and Technical Stuff
Sellers of ESP-01's with deep sleep RSP/XPD_DCDC pins already soldered?
(1/1)
ziplock9000:
I've been trying to solder the RST and XPD_DCDC pins on the cheap ESP-01's I have and I've found it impossible after several attempts. It's just too small even under magnification for me and the equipment I have.

Does anyone know anywhere that sells these already soldered and with AT firmware installed?

I tried using an ESP-03 which is easier to solder these pins together, but it just simply would not flash the firmware after screwing will all sorts of pins and trying different setups.

Thanks.


Navigation
Message Index
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod