Electronics > Projects, Designs, and Technical Stuff

Sellers of ESP-01's with deep sleep RSP/XPD_DCDC pins already soldered?

(1/1)

ziplock9000:
I've been trying to solder the RST and XPD_DCDC pins on the cheap ESP-01's I have and I've found it impossible after several attempts. It's just too small even under magnification for me and the equipment I have.

Does anyone know anywhere that sells these already soldered and with AT firmware installed?

I tried using an ESP-03 which is easier to solder these pins together, but it just simply would not flash the firmware after screwing will all sorts of pins and trying different setups.

Thanks.


Navigation

[0] Message Index

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod