EEVblog Electronics Community Forum

Electronics => Projects, Designs, and Technical Stuff => Topic started by: Hypsjw61 on November 12, 2024, 01:05:35 am

Title: sg3525 fiber splice termination device
Post by: Hypsjw61 on November 12, 2024, 01:05:35 am

We need to make a fiber termination device using SG3525, TC4427 and 1000V MOSFETs. There will be a 24/750 V transformer at the output of the MOSFETs. Since this is my first physical project, I need your help. Can you help me with a design scheme, especially for the part up to the transformer?

Title: Re: sg3525 fiber splice termination device
Post by: jonpaul on November 12, 2024, 04:41:06 am

Very dangerous to work at 1000V SMPS.

Get experience in a lab or firm doing off line SMPS forst, take safety precautions and protect your equipment and life.

Minimum equip: 240:240 isolatio trsf, variac, scope, proper current and voltage probes.

Jon