Electronics > Projects, Designs, and Technical Stuff
sg3525 gets mosfets heated
(1/4) > >>
dave_j_fan:
dear all
 i am trying Sg3525 inverter.
issue is Mosfets getting superhot in 2-3min


original maker showed no use of heatsinks..so i have not added heatsink

just running 60w tablefan

pcb ofthe originalmaker is like this u cab see the connections
very.clearly.

please advice how to reduce heating.

i swapped diodes 4007 and mosfets z44

running 60wtable fan

transformer  15amp 12v
T3sl4co1l:
Schematic?  :-//

Tim
dave_j_fan:
attached pcb
has good clarity.


i will draw a schem.if not clear.
oPossum:
High side gate drive is probably horrible. Slow opto to turn it on, and a 2k resistor to slowly turn it off. A proper bootstraped gate driver IC would be a big improvement.
dave_j_fan:
any alternate circuits.. avoiding ic due to cost increase
Navigation
Message Index
Next page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod