Can anyone help me compile the source code into a HEX file? About OBD-ii adapter

[daisizhou]

http://www.obddiag.net/allpro.html
https://github.com/abhishekoct18/allpro            (Code connection)
I found the above OBD-II adapter on the website, and the author published the schematic and source code.
But no HEX file was published,I hope to make it in my free time.
Hope to help me convert the source code into a HEX file. It is best to convert the schematic into a layout file, which is the file format of the PCB circuit board.

I am a beginner in electronics, thank you for your help

[CJay]

Instructions here:

http://www.obddiag.net/allpro_develop.html

[daisizhou]

I downloaded the code file, but I will not use the compiled software.I do not use MCUXpresso IDE.
Can anyone help me compile it? Looking forward to the HEX file I need, thanks

[daisizhou]

Please continue to ask kind people to help me get the HEX file

[DavidAlfa]

I downloaded the code file, but I will not use the compiled software.I do not use MCUXpresso IDE.
Can anyone help me compile it? Looking forward to the HEX file I need, thanks

Why can't you use it? If the registration is a problem for you, I uploaded MCUXPresso IDE here:

https://drive.google.com/file/d/1-zUFTgxUPGZ6hI_S9l-xrlU9UhOOydkB/view?usp=sharing

It's really easy. Install the IDE, click on Import... Existing project... Select the allpro-master folder and it'll find the project.
Then just click on build.

[daisizhou]

First of all, thank you all for your help, my country is not accessible by Google, so downloading is very difficult

[DavidAlfa]

Avoiding baidu and other impossible sites to use outside China, what other options are available?

MediaFire?
Mega.nz? It's owned by chinese company