Electronics > Projects, Designs, and Technical Stuff

Single LED clock

(1/1)

johnboxall:
I was bored the other week and came up with a design for a blinking clock. It used a single RGB LED to blink out the hours and minutes using different colours. Details are here: http://bit.ly/aG4QZz.

lamja:
Cool. I2C and everything...

I did also buy a bounch of Atmegas with Arduino boot.


--- Quote ---Setting the clock is simple. It is set to start at 12:00 upon power up. So for the first use you have to wait until about five seconds before midday or midnight, then power it up.
--- End quote ---
LOL  ;D

Nice work.

johnboxall:
Thank you. The next clock will be the complete opposite: 8x8 LED matrix, menu systems, buzzer, temperature, complete madness...

Navigation

[0] Message Index