« previous next »
Pages: [1]   Go Down

Author Topic: How do I fix this and do a better job at probing it?  (Read 1516 times)

0 Members and 1 Guest are viewing this topic.

Offline itstemo1Topic starter

  • Newbie
  • Posts: 2
How do I fix this and do a better job at probing it?
« on: January 01, 2013, 10:49:29 pm »

This is the header for the Zune
Logged
 

Offline robrenz

  • Super Contributor
  • ***
  • Posts: 3035
  • Country: us
  • Real Machinist, Wannabe EE
Re: How do I fix this and do a better job at probing it?
« Reply #1 on: January 01, 2013, 11:06:45 pm »
Use solder wick to get rid of the solder bridging.

Tin your probe wire and clean and re flux it. flux the test point you want to solder to.Then use a clean iron tip to just melt the tinned lead to your test point.
Logged
 
Pages: [1]   Go Up
« previous next »

Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf

 


EEVblog Main Site EEVblog on Youtube EEVblog on Twitter EEVblog on Facebook EEVblog on Odysee