Electronics > Projects, Designs, and Technical Stuff
Sprint Day 2: What developing world substitutions are there for flow meters?
ebastler:
--- Quote from: Enginerding on March 31, 2020, 07:59:25 pm ---Particularly, whether a project has a BOM is going to be a good indicator of its viability.
--- End quote ---
What kind of criterion is that?? Where does your initiative stand on the "viability" scale according to your own benchmark? :-\
Releasing a BOM is one of the last steps once your design is complete, verified and validated.
"All unfinished projects are worthless, so let's start another one!"
TheHolyHorse:
--- Quote from: ebastler on April 04, 2020, 03:47:52 pm ---
--- Quote from: Enginerding on March 31, 2020, 07:59:25 pm ---Particularly, whether a project has a BOM is going to be a good indicator of its viability.
--- End quote ---
[...]
"All unfinished projects are worthless, so let's start another one!"
--- End quote ---
Yeah lets start more projects that will never be finished :palm:
Simon:
If you are buying serious quantities from Bosch MAF meters are like £50, the smallest ones do 0-3l/m. attached is a datasheet of two models that are obsolete but will give you an idea. The other method of measuring flow is to create a small restriction (which by definition any length of hose is) and measure the pressure drop across it but that will need fully characterizing and ideally you want a sensor with the right output curve.
Yes if you create too many of these threads you will just loose the people you thought were on board (laughing at you more like), eventually piss everyone off and get banned.
Simon:
--- Quote from: ebastler on April 04, 2020, 03:47:52 pm ---
--- Quote from: Enginerding on March 31, 2020, 07:59:25 pm ---Particularly, whether a project has a BOM is going to be a good indicator of its viability.
--- End quote ---
What kind of criterion is that?? Where does your initiative stand on the "viability" scale according to your own benchmark? :-\
Releasing a BOM is one of the last steps once your design is complete, verified and validated.
"All unfinished projects are worthless, so let's start another one!"
--- End quote ---
Because in a simpletons mind if he has a list of parts that's it, just attach them all together to the drawings and hey presto. Remember this guy is a medic, not an engineer so he hasn't a flipping clue what he is doing.
EEVblog:
And it was smart of him not to mention the open Medtronics specs, I'm sure that's very deliberate.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version