Author Topic: STM32 jetson  (Read 1258 times)

0 Members and 1 Guest are viewing this topic.

Offline LootMasterTopic starter

  • Regular Contributor
  • *
  • !
  • Posts: 192
  • Country: ca
STM32 jetson
« on: May 23, 2024, 09:30:23 am »
I need help. Who wants to help me fight back vs NVIDIA and claim a bit of their %?

Your role is to help me with the FPGA, and maybe the FMC/QSPI dual bank.

You get what I get, 50/50.
 

Offline aliarifat794

  • Regular Contributor
  • *
  • Posts: 130
  • Country: bd
Re: STM32 jetson
« Reply #1 on: May 23, 2024, 10:22:22 am »
Oh! I am not experienced in using this board, unfortunately. I hope someone qualified enough will see this.
 

Offline LootMasterTopic starter

  • Regular Contributor
  • *
  • !
  • Posts: 192
  • Country: ca
Re: STM32 jetson
« Reply #2 on: May 23, 2024, 03:10:39 pm »
ITS  custom HW that I made.
 

Offline lawrence11

  • Frequent Contributor
  • **
  • !
  • Posts: 322
  • Country: ca
Re: STM32 jetson
« Reply #3 on: May 23, 2024, 04:13:48 pm »
its a sandwich.

135$ BOM , 6 layer cheap PCB.

QSPI sandwich without bread.

And a Synch Sram sandwich with bread.

Its really not that bad, it goes fast.

It will be great once I can get a custom machined. stripper with notches.
 

Offline gnif

  • Administrator
  • *****
  • Posts: 1690
  • Country: au
Re: STM32 jetson
« Reply #4 on: May 23, 2024, 04:46:12 pm »
@LootMaster @lawrence11

Why are you talking to yourself? Multiple accounts on this forum are against the rules.
 
The following users thanked this post: tggzzz

Online EEVblog

  • Administrator
  • *****
  • Posts: 37910
  • Country: au
    • EEVblog
Re: STM32 jetson
« Reply #5 on: May 23, 2024, 11:22:12 pm »
@LootMaster @lawrence11
Why are you talking to yourself? Multiple accounts on this forum are against the rules.

Busted  ;D
Which account would you like us to ban first?
 
The following users thanked this post: tggzzz

Offline LootMasterTopic starter

  • Regular Contributor
  • *
  • !
  • Posts: 192
  • Country: ca
Re: STM32 jetson
« Reply #6 on: May 23, 2024, 11:23:30 pm »
It was a mistake, I lost one and made another. ban lawrence11
 

Offline LootMasterTopic starter

  • Regular Contributor
  • *
  • !
  • Posts: 192
  • Country: ca
Re: STM32 jetson
« Reply #7 on: May 24, 2024, 02:56:27 am »
The only reason I am showing you guys this beauteous design ie because I know full well there is no time for you guys to steal my design.

I am indeed, a prophetic person, as you can see, from my past posts. 3 years ago... When I started preaching everywhere like a HOBO with  Homer Simpson's sign... the end is near.... God loves you, he's going to kill youuuuuuu.

by the help of the holy spirit I now look smart to my entourage.
« Last Edit: May 24, 2024, 03:23:55 am by LootMaster »
 

Offline moffy

  • Super Contributor
  • ***
  • Posts: 1821
  • Country: au
Re: STM32 jetson
« Reply #8 on: May 24, 2024, 04:39:41 am »
The only reason I am showing you guys this beauteous design ie because I know full well there is no time for you guys to steal my design.

I am indeed, a prophetic person, as you can see, from my past posts. 3 years ago... When I started preaching everywhere like a HOBO with  Homer Simpson's sign... the end is near.... God loves you, he's going to kill youuuuuuu.

by the help of the holy spirit I now look smart to my entourage.
Very sadly conceited and deluded. :(
 

Offline pcprogrammer

  • Super Contributor
  • ***
  • Posts: 3920
  • Country: nl
Re: STM32 jetson
« Reply #9 on: May 24, 2024, 05:38:13 am »
And double posting. OP started the same thread in the FPGA section.

Offline LootMasterTopic starter

  • Regular Contributor
  • *
  • !
  • Posts: 192
  • Country: ca
Re: STM32 jetson
« Reply #10 on: May 24, 2024, 05:58:09 am »
All the threads are bad anyways. So I double posted.

There's only me vs NVIDIA, me vs the devil.

You are not the "enlightened ones".

I am the idea man guru, the CEO, you are the slaves, I tell you what to do and you do.

Now work!

 
The following users thanked this post: pardo-bsso

Online ebastler

  • Super Contributor
  • ***
  • Posts: 6667
  • Country: de
Re: STM32 jetson
« Reply #11 on: May 24, 2024, 08:28:50 am »
I am indeed, a prophetic person, as you can see, from my past posts. 3 years ago... When I started preaching everywhere like a HOBO with  Homer Simpson's sign... the end is near.... God loves you, he's going to kill youuuuuuu.
by the help of the holy spirit I now look smart to my entourage.

There's only me vs NVIDIA, me vs the devil.
You are not the "enlightened ones".
I am the idea man guru, the CEO, you are the slaves, I tell you what to do and you do.

Now work!

Don't drink and post.
 
The following users thanked this post: tooki

Offline pcprogrammer

  • Super Contributor
  • ***
  • Posts: 3920
  • Country: nl
Re: STM32 jetson
« Reply #12 on: May 24, 2024, 08:36:23 am »
All the threads are bad anyways. So I double posted.

There's only me vs NVIDIA, me vs the devil.

You are not the "enlightened ones".

I am the idea man guru, the CEO, you are the slaves, I tell you what to do and you do.

Now work!

Someone lost his marbles  :-DD

Online tggzzz

  • Super Contributor
  • ***
  • Posts: 19821
  • Country: gb
  • Numbers, not adjectives
    • Having fun doing more, with less
Re: STM32 jetson
« Reply #13 on: May 24, 2024, 10:24:01 am »
@LootMaster @lawrence11
Why are you talking to yourself? Multiple accounts on this forum are against the rules.

Busted  ;D
Which account would you like us to ban first?

Given insulting, rude and (arguably) religous posts like these...
https://www.eevblog.com/forum/projects/help-me-reverse-engineer-this-video/msg3392040/#msg3392040
https://www.eevblog.com/forum/chat/end-of-world-is-near-help-me/msg3381828/#msg3381828
https://www.eevblog.com/forum/projects/help-me-reverse-engineer-this-video/msg3382126/#msg3382126
... why stop there.

N.B. that's two minutes research. I'll bet there are more examples to be found.
There are lies, damned lies, statistics - and ADC/DAC specs.
Glider pilot's aphorism: "there is no substitute for span". Retort: "There is a substitute: skill+imagination. But you can buy span".
Having fun doing more, with less
 
The following users thanked this post: tooki, pcprogrammer

Offline temperance

  • Frequent Contributor
  • **
  • Posts: 517
  • Country: 00
Re: STM32 jetson
« Reply #14 on: May 24, 2024, 01:09:07 pm »
Lootmaster, the power switch on the God helmet I've sent you some time ago is located on the rear side right next to subliminal message intensity adjuster.
 
The following users thanked this post: tooki

Offline LootMasterTopic starter

  • Regular Contributor
  • *
  • !
  • Posts: 192
  • Country: ca
Re: STM32 jetson
« Reply #15 on: May 24, 2024, 01:51:25 pm »
The God helmet? You mean my device that goes on your head for gaming? It goes on top of your apple vision pro, and theres a support that goes on to you chair so your neck doesnt get injured.

Look at you people... Siding with Jensen Huang, basically we "customers"  are nothing now is that it?

W/e we do is gonna be eaten up by your advantages ?

How abou I write the name and go into my prayer closet, Tgggzzz and Jensen and the whole continent of those ingrate people who built their lives on sand (their foundation) so that a higher purpose should be revealed beyond AI and  into the ocean goes those people and joins the other sand people.
 

Online tggzzz

  • Super Contributor
  • ***
  • Posts: 19821
  • Country: gb
  • Numbers, not adjectives
    • Having fun doing more, with less
Re: STM32 jetson
« Reply #16 on: May 24, 2024, 03:20:08 pm »
I am indeed, a prophetic person, as you can see, from my past posts. 3 years ago... When I started preaching everywhere like a HOBO with  Homer Simpson's sign... the end is near.... God loves you, he's going to kill youuuuuuu.
by the help of the holy spirit I now look smart to my entourage.

There's only me vs NVIDIA, me vs the devil.
You are not the "enlightened ones".
I am the idea man guru, the CEO, you are the slaves, I tell you what to do and you do.

Now work!

Don't drink and post.

I don't think drink can be responsible for his latest emission, viz:

The God helmet? You mean my device that goes on your head for gaming? It goes on top of your apple vision pro, and theres a support that goes on to you chair so your neck doesnt get injured.

Look at you people... Siding with Jensen Huang, basically we "customers"  are nothing now is that it?

W/e we do is gonna be eaten up by your advantages ?

How abou I write the name and go into my prayer closet, Tgggzzz and Jensen and the whole continent of those ingrate people who built their lives on sand (their foundation) so that a higher purpose should be revealed beyond AI and  into the ocean goes those people and joins the other sand people.

It will be a shame if EEVBlog is allowed to become like Twatter/Y.
« Last Edit: May 24, 2024, 03:21:53 pm by tggzzz »
There are lies, damned lies, statistics - and ADC/DAC specs.
Glider pilot's aphorism: "there is no substitute for span". Retort: "There is a substitute: skill+imagination. But you can buy span".
Having fun doing more, with less
 

Offline LootMasterTopic starter

  • Regular Contributor
  • *
  • !
  • Posts: 192
  • Country: ca
Re: STM32 jetson
« Reply #17 on: May 24, 2024, 03:38:59 pm »
real humans roam these boards we will not be had by the tricks of the easily triggered robots aka  brit lib subbies like tgzzz.

woosh, go away.
 

Online ebastler

  • Super Contributor
  • ***
  • Posts: 6667
  • Country: de
Re: STM32 jetson
« Reply #18 on: May 24, 2024, 03:40:25 pm »
I have reported your latest posts and trust the moderators to decide on the right course of action. Let's see who will go away.
 
The following users thanked this post: tooki

Offline LootMasterTopic starter

  • Regular Contributor
  • *
  • !
  • Posts: 192
  • Country: ca
Re: STM32 jetson
« Reply #19 on: May 24, 2024, 04:07:08 pm »
ahaha electronics is noob and repetitive.

its filled with liberally educated europeeps who report stuff and who are trying to outsmart the universe and live carelessly in the coastlands as if any of these little sand gizmos were gonna really save us like damn.

I realized this, its built on sand.

It was fun but now that Jensen and the libbies popped out of the woodwork and ruined the universe.

Now its time for a higher meaning we are at the end of the matrix.
« Last Edit: May 24, 2024, 04:12:22 pm by LootMaster »
 

Offline gnif

  • Administrator
  • *****
  • Posts: 1690
  • Country: au
Re: STM32 jetson
« Reply #20 on: May 24, 2024, 06:17:20 pm »
I had hoped that this loony behaviour would settle down and we would see some reasonable behaviour, but it's just getting worse with every post.
@LootMaster - Your behaviour here and in prior threads not acceptable in this community, please find somewhere else to post.
Banned.
« Last Edit: May 24, 2024, 06:19:43 pm by gnif »
 
The following users thanked this post: EEVblog, janoc, thm_w, moffy, tggzzz, ebastler, MK14

Offline Halcyon

  • Global Moderator
  • *****
  • Posts: 5731
  • Country: au
Re: STM32 jetson
« Reply #21 on: May 25, 2024, 05:39:08 am »
woosh, go away.

Great advice. Fully support gnif's view.
 
The following users thanked this post: gnif, tggzzz, tooki, MK14

Offline gnuarm

  • Super Contributor
  • ***
  • Posts: 2246
  • Country: pr
Re: STM32 jetson
« Reply #22 on: May 25, 2024, 05:51:39 am »
And double posting. OP started the same thread in the FPGA section.

Then why are you replying here???
Rick C.  --  Puerto Rico is not a country... It's part of the USA
  - Get 1,000 miles of free Supercharging
  - Tesla referral code - https://ts.la/richard11209
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf