EEVblog Electronics Community Forum

Electronics => Projects, Designs, and Technical Stuff => Topic started by: ricko_uk on June 15, 2021, 09:50:06 pm

Title: Tact push button with cap 7-10mm overall height above PCB and 4-6 diameter cap
Post by: ricko_uk on June 15, 2021, 09:50:06 pm

Hi,
I have been looking everywhere for a 6x6 tact switch with a round cap 4-6mm in diameter but only 7-10mm overall height but couldn't find any that is SMD (Omron has various but are all through hole).

Can you suggest any series that is similar but SMD?

Thank you! :)