Tektronix TekProbe Power Supply for Agilent, Rigol and other oscilloscopes

[Jay_Diddy_B]

Hi group,

I got a PM asking about the dimensions of the BNC connector that I used. For the benefit of anybody else who wants to build this project.

I don't know the exact part number of the BNC connector that I used. It was something that I had in my junk box from recycling equipment.

I have measured the connector on the unit I built and it matches the dimensions of this Amphenol Connex part 112424




I am sure that many other parts will work, but very few datasheets show all the dimensions.

Jay_Diddy_B

[greasemonkey]

Since I shamelessly copied Jay_Diddy_B's design I thought I would share the files.

https://github.com/greasemonkey-btbm/Tekprobe-USB-power-supply


Size comparison with an 87V

A very small signal (0.176mVrms, 50kHz) through my ADA400A