Electronics > Projects, Designs, and Technical Stuff

Thermal camera that can see the heat of glossy and matte surface?

(1/2) > >>

daslolo:
I am using a seek compact pro which has glossy setting, it only multiplies temperature though so I cannot evaluate the heat movement of matte and glossy components in the same picture.
Is there a system that can?

OM222O:
I believe some of the FLIR ones allow you to add an "emisivity map" so you can use it across multiple surfaces, but you have to somehow generate that map for your specific object which is really painful.

DaJMasta:
The usual simple approach is to paint it, matte black spray, even in a less than complete coat, does great.  You could also try masking tape or similar, all provided that the temperatures involved aren't too high to allow it.

Someone:
Just modify the surface:
https://www.flir.com.au/discover/rd-science/use-low-cost-materials-to-increase-target-emissivity/

daslolo:
Thanks folks,
I'd like to apply something temporary on these dedicate PGS ribbons, does anyone knows of a paint that crumples after some time?

Navigation

[0] Message Index

[#] Next page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod