Author Topic: TI Voyage 200 Repair Video  (Read 2301 times)

0 Members and 1 Guest are viewing this topic.

Offline pknoe3lh

  • Regular Contributor
  • *
  • Posts: 115
  • Country: at
  • Trust me I'm an engineer
    • My Homepage
TI Voyage 200 Repair Video
« on: March 06, 2017, 09:55:36 am »
Hey Everyone!

Want to share my YouTube Video of the repair of my Voyager 200 where I replaced the Display.

YouTube:
https://youtu.be/Mem8wmdTyFw (English Version)
https://youtu.be/u74etmyXra0 (German Version)

Photos:
https://goo.gl/photos/9UwCRkS8hzEKvhMJ6

DataSheets:
http://ww1.microchip.com/downloads/en/DeviceDoc/61168E.pdf (pic32mx250f128b)
http://www.electrodragon.com/product/3-5-320x480-tft-lcd-module-for-arduino-8-bit-parallel/ (LCD)
http://www.ncsys.co.jp/webshop/GTV350MPZI04(ILI9481).pdf (LCD)

Greetings
Patrick

Offline Arielo

  • Contributor
  • Posts: 8
  • Country: ar
Re: TI Voyage 200 Repair Video
« Reply #1 on: September 06, 2017, 05:15:15 pm »
Hello Patrick,

I've watched your video, and it was an interesting repair the one you did.

I'm curious about the LCD, I have the same LCD display, and I'm very new to GUI and LCD programming. I've been using MCUs for a few years now, interfacing the user via computer (usart), or some 16x02 LCD, and recently, some nokia 5110 lcd displays, but I wanted to go a bit further, and start using some color LCD, and learn a little about GUI programming.

Could you point me to some books, or websites to learn more about this? Which library did you use to interface the MCU with the display? I've used PIC32MX250F128B before, but I wanted to use an STM32 now.

Thank you!
 

Offline pknoe3lh

  • Regular Contributor
  • *
  • Posts: 115
  • Country: at
  • Trust me I'm an engineer
    • My Homepage
Re: TI Voyage 200 Repair Video
« Reply #2 on: October 10, 2017, 01:57:40 pm »
Hallo Arielo,

Sorry for the late reply :-(

Could you point me to some books, or websites to learn more about this? Which library did you use to interface the MCU with the display? I've used PIC32MX250F128B before, but I wanted to use an STM32 now.

Its very basic :-( I just relay the data from the voyage200
https://github.com/pknoe3lh/voyager200repair/

I think Microchip offers some very capable graphics libraries:
http://www.microchip.com/design-centers/graphics

GUI programming it self is its own science ....
I did something in this direction in my Bachelor Thesis (but it was mainly about the platform...):

https://drive.google.com/file/d/0BwT_vqurq8C9N3pNOG56c3JlWDg/view?usp=sharing

greetings
Patrick


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf