Electronics > Projects, Designs, and Technical Stuff
Toroid Winder w/o cutting the wire.
<< < (6/6)
Psi:

--- Quote from: ali_asadzadeh on May 28, 2019, 05:16:56 am ---Guys do we have good videos on how they works? I managed to find only the ones that are used for big torids! what about the smaller ones used in PC motherboard, they have the diameter of under 1.5cm

--- End quote ---

I think they are the same, just smaller.





Although, the tiny motherboard DCDC toroids usually only have like 5 turns.
So they maybe done with hand machine, since china labour is cheap






Thinking about it some more, with thick wire and only a few turns there maybe other automated options for motherboard DCDC inductors
The wire will hold its shape, so it could be pre-bent into a spiral by machine and then rotated onto the toroid core.
ali_asadzadeh:
Thanks, I tough they might have use different method, since they are small, and most of them use multiple parallel thick wires!
Navigation
Message Index
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod