Electronics > Projects, Designs, and Technical Stuff
Track and Flux
thinkfat:
--- Quote from: PerranOak on June 18, 2019, 02:58:38 pm ---I have a flux pen but can't tell what type it is. Could you recommend a specific flux, cheers.
--- End quote ---
Edsyn FL22
Gesendet von meinem Nokia 6.1 mit Tapatalk
electricMN:
1206 is huge for SM. You shouldn't have any problems soldering that. Just do a few practice components and you'll get the hang of it. Watch out for cold solder joints.
PerranOak:
Edsyn FL22, thank you for that: it is really expensive!
1206 huge! Blimey, I thought it was minute! :o
thinkfat:
--- Quote from: PerranOak on June 19, 2019, 03:21:03 pm ---Edsyn FL22, thank you for that: it is really expensive!
1206 huge! Blimey, I thought it was minute! :o
--- End quote ---
FL22 is a bit on the expensive side, but it is also very good flux. You don't need all that much anyway.
Anyway you asked for recommendations and this is my current favorite.
Gesendet von meinem Nokia 6.1 mit Tapatalk
PerranOak:
Indeed and thank you very much.
Navigation
[0] Message Index
[*] Previous page
Go to full version