Electronics > Projects, Designs, and Technical Stuff

Transformer ID?

(1/4) > >>

jinuq:
Can any one help me ID this transformer or am I miss labeling it a transformer? I have googled for the logo, tha part number, etc. All to no avail.

TheWelly888:
It looks like a switch mode PSU transformer which was specifically designed and manufactured for the PSU it is in. Because of that it is very unlikely you will be able to get a replacement for this transformer even if you contact the PSU's manufacturer.

jinuq:
That was the presumption I was working under. I was still hoping to find the manufacture, if still in business, and ask any ways.

Zero999:
It's unlikely it's the transformer which is broken.

There's more chance the rectifier, driver transistors or control IC are bad.

jinuq:
Here are pictures of the PCB front and back.

Power comes in at bottom left, hits the bridge rectifier gets converted to dc @ 330V. Power is present up to the right side of the transformer everything on the left has no power. I think I am just missing a trace or component that brings power to the other section.

Navigation

[0] Message Index

[#] Next page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod