Electronics > Projects, Designs, and Technical Stuff

Transmission of alternating energy.

(1/6) > >>

Magoku:
     Anyone know Transmission of aternating energy or know some others who have tips trick working or tests they want to do on it. I want to understand the concept of electricity into physical energy through the target of 10 meters and to which the requirement of this i would like to produce 73% xfer of wattage from the station to the receiver in what is also to be needed and i dont think they are that different to each other except addded wireless receiver which i would like to test. Just wondering if anyone has any on hand time looking to do some recovery on this sort a thing can help wont give up or can be interested too would like to know locally to me but internet may include needing to make more than 1 set-up.
 (Edit:-) I know lots about hte stuff and look no one is professional here, really! I don't think the government understand the way it is to work though it sort not out there too and i would like to be part of it a bit with a beater game, really! have tries and tries at it but it may take another or a few to work things out together and i think its a fair prize to invent something there wasn't even understood yet at a level higher than what is shown in the points throughout the history and may be the newest thing out there there if seen to work out. Now i do read lots of things so i don't completely have a undercare on this but too it needs people because it should be enjoyed and i think goes without saying logic will recredit where all can utilise from this wonderful concept through discovery. Thanks hope i get some responses of interest as really seem to burn the fuse on me this thing...

Marco:
Wires work really well ;) But I assume you mean wireless. 10 meter is too much for resonant transfer with reasonable size coils. So then you are left with ultrasonic, laser, microwave and mmWave. Of those microwave is really the only one which can achieve your desired efficiency.

-The safety and interference regulations for ISM bands make wireless power transfer a non starter for anything more than a couple 100 mW (unless you are important enough to get an exemption).
-To get decent directionality at 2.4 GHz you need large antennas.

To sum up, you might be able to transfer a couple 100 mW over 10 meter with 1m2 antennas.

Gyro:

--- Quote from: Magoku on June 10, 2023, 09:42:14 am ---     Anyone know Transmission of aternating energy or know some others who have tips trick working or tests they want to do on it. I want to understand the concept of electricity into physical energy through the target of 10 meters and to which the requirement of this i would like to produce 73% xfer of wattage from the station to the receiver in what is also to be needed and i dont think they are that different to each other except addded wireless receiver which i would like to test. Just wondering if anyone has any on hand time looking to do some recovery on this sort a thing can help wont give up or can be interested too would like to know locally to me but internet may include needing to make more than 1 set-up.
 (Edit:-) I know lots about hte stuff and look no one is professional here, really! I don't think the government understand the way it is to work though it sort not out there too and i would like to be part of it a bit with a beater game, really! have tries and tries at it but it may take another or a few to work things out together and i think its a fair prize to invent something there wasn't even understood yet at a level higher than what is shown in the points throughout the history and may be the newest thing out there there if seen to work out. Now i do read lots of things so i don't completely have a undercare on this but too it needs people because it should be enjoyed and i think goes without saying logic will recredit where all can utilise from this wonderful concept through discovery. Thanks hope i get some responses of interest as really seem to burn the fuse on me this thing...

--- End quote ---

"Alternating energy" is an interesting concept!

TimFox:
Before wireless telegraphy (Marconi and his competitors), there were others who used electromagnetic induction (near field) rather than radiation (wave propagation).

Magoku:
 Thanks for the reply Marco, I think your right all that it come to me making a transmitter is to poke at the specs a bit. To see the tuning of it work not looking at microwave nor a antenna would be what i'm thinking to grasp at what kind of inducers or recepatacle. I could make it from that can be useful to produce wireless amplitude which is not the electricty but the magnetic waves going along the ground perfectly safe. Then a harness can be used with a channel to power things or carried deviced with sheild and inductor, as opposed from using the grounding for the transmitter and the receiver (Harness).
   I got some information to this sort a thing, also would like to try other means to create power probably pretty bazaar really but i do think there is a way.
https://www.wirelesspowerconsortium.com/knowledge-base/magnetic-induction-technology/how-it-works/

Navigation

[0] Message Index

[#] Next page