EEVblog Electronics Community Forum

Electronics => Projects, Designs, and Technical Stuff => Topic started by: akis on June 26, 2016, 08:52:36 am

Title: Trying to find an enclosure
Post by: akis on June 26, 2016, 08:52:36 am

The dimensions I need are no less than :

internal height 48mm, internal width 150mm, internal depth 175mm

panel at the "front" 150mm x 50mm (or thereabouts)

I currently use Hammond made of ABS 1598CGY but it is slightly too small and cannot fit the batteries inside.

Thanks

Title: Re: Trying to find an enclosure
Post by: IconicPCB on June 26, 2016, 11:30:32 am

How many dozen do you need?

Title: Re: Trying to find an enclosure
Post by: ZeTeX on June 26, 2016, 01:34:27 pm

Quote from: akis on June 26, 2016, 08:52:36 am

The dimensions I need are no less than :

internal height 48mm, internal width 150mm, internal depth 175mm

panel at the "front" 150mm x 50mm (or thereabouts)

I currently use Hammond made of ABS 1598CGY but it is slightly too small and cannot fit the batteries inside.

Thanks

Look in aliexpress \ eBay if you need only one, or your local distributors.

Title: Re: Trying to find an enclosure
Post by: Alex Eisenhut on June 26, 2016, 02:34:22 pm

http://www.budind.com/view/Plastic+Boxes/Plasticase+Style+D (http://www.budind.com/view/Plastic+Boxes/Plasticase+Style+D)