Electronics > Projects, Designs, and Technical Stuff
UART communication between 2.8V and 1.8V
(1/1)
Aankur:
I want to establish a UART communication between two modules. The Rx/Tx Voltage levels of the modules are 2.8V and 1.8V. Also, I have only 3.3V as the supply voltage on my board.

Kindly guide me as to how can I perform this level shifting.

 

Thanks
oPossum:
74LVC1T45
Navigation
Message Index
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod