Electronics > Projects, Designs, and Technical Stuff
Understanding this circuit
(1/1)
Red_Micro:
Hi,
I can't wrap my head around the circuit attached. U2 comparator is acting as multivibrator, right? It's weird that U2 is powered from GND and -12V. All I know about this circuit is that it is used to inject an AC signal to the test coil when PB1 is pressed. But how does it exactly work?
graybeard:
Yes it is a relaxation oscillator turning the fet it is driving on and off. Ground is arbitrary, it can be any rail.
I recently designed a circuit where I ran my 5V logic from GND on the high side to -5V on the low side because it made sense for the rest of the circuit.
The switch turns on M1 and its load. M1 is shut off when M2 is on.
Navigation
[0] Message Index
Go to full version