Author Topic: Unisolder 5.2 - Universal Soldering Station  (Read 2453 times)

0 Members and 1 Guest are viewing this topic.

Online MitiTopic starter

  • Super Contributor
  • ***
  • Posts: 1405
  • Country: ca
Unisolder 5.2 - Universal Soldering Station
« on: April 13, 2019, 09:44:34 pm »
A very interesting project named Unisolder. It can take almost any soldering Iron and is open source.
I made the boards years ago but my lazy bum couldn't be bothered to put them in a box. Actually I didn't find a suitable box at my price point... free. :-DD
Finally I found some scrap boxes from work. It came out pretty nice. It is a slanted cube pretty much.
I thought I should share, I did a search and it didn't come with it being ever posted here so I hope I don't duplicate.

Miti

Edit: Sorry, I forgot the link
http://dangerousprototypes.com/forum/viewtopic.php?f=56&t=7218
« Last Edit: April 13, 2019, 09:51:17 pm by Miti »
Fear does not stop death, it stops life.
 
The following users thanked this post: edavid

Offline bitseeker

  • Super Contributor
  • ***
  • Posts: 9057
  • Country: us
  • Lots of engineer-tweakable parts inside!
Re: Unisolder 5.2 - Universal Soldering Station
« Reply #1 on: April 13, 2019, 11:41:44 pm »
Nice job with the enclosure. :-+
TEA is the way. | TEA Time channel
 
The following users thanked this post: Miti

Offline GreyWoolfe

  • Supporter
  • ****
  • Posts: 3652
  • Country: us
  • NW0LF
Re: Unisolder 5.2 - Universal Soldering Station
« Reply #2 on: April 14, 2019, 02:26:01 am »
Nice job with the enclosure. :-+
[/quotee]

A bargain at twice the price.   ;D
"Heaven has been described as the place that once you get there all the dogs you ever loved run up to greet you."
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf