| Electronics > Projects, Designs, and Technical Stuff |
| USB2.0 cable requirements |
| (1/1) |
| IconicPCB:
A USB 2.0 camera is located on a robotic arm. It is connected to a USB port via a non standard ( highly flexible ) USB cable due to continuous movement of the arm. In general are there specific electrical requirements the USB cable has to meet ( say pF/unit length between conductors, nH/ unit length etc ) |
| IconicPCB:
D+ and D- form a twisted pair transmission line with differential characteristic impedance of 90 +/-15% ohm . |
| Navigation |
| Message Index |