EEVblog Electronics Community Forum

Electronics => Projects, Designs, and Technical Stuff => Topic started by: dakamaster on May 28, 2021, 10:40:46 am

Title: Use BLE to configure Dual-band WiFi Microcontroller
Post by: dakamaster on May 28, 2021, 10:40:46 am

Here we introduce another way to download firmware to your microcontroller board.

With a BLE5.0 & Dual-band WiFi microcontroller, you will never have to worry about re-compiling the code just to change the WiFi SSID and password.
The working principle of BLE5.0 is working as follows:

1. the Ameba RTL8722DM board will send BLE information to your phone;
2. the phone will send the corresponding WiFi configuration including SSID and password to the RTL8722DM board;
3. the board is able to connect to the WiFi with the same SSID as your phone;

Please follow our GitHub: "ambiot" for more information and the most updated features: https://github.com/ambiot. (https://github.com/ambiot.)

YouTube demo video for you to enhance the understanding: https://www.youtube.com/watch?v=TA4A-VXbImo&t=40s (https://www.youtube.com/watch?v=TA4A-VXbImo&t=40s)