| Electronics > Projects, Designs, and Technical Stuff |
| Wanted 1uF 250V |
| (1/1) |
| NivagSwerdna:
I really like small SMD electrolytic caps e,g, EEVEB2E100Q but they are very expensive >£2... but so is a 1uF 250V ceramic... at least >£1 and >£2 in small quantities Is through hole radial electrolytic the only sensible choice for such a device? Thanks in advance PS I do need the voltage rating |
| JackJones:
Film capacitors could be an alternative. I have a 1uF 450V through hole one right here on my desk which is about 10mmx10mm. It's this one specifically: https://lcsc.com/product-detail/CBB-Capacitors_CBB21Metal-film-capacitors-1uF-105-5-450V_C109544.html |
| jhpadjustable:
Ten yankeecents in 5-piece lots (plus customs duties, shipping, handling fees, blah blah): https://lcsc.com/product-detail/Multilayer-Ceramic-Capacitors-MLCC-SMD-SMT_Prosperity-Dielectrics-FS43X105K251EGG_C381468.html Five yankeecents in 10-piece lots (etc.etc.): https://lcsc.com/products/Aluminum-Electrolytic-Capacitors-SMD_418.html THT 400V caps do have the advantage of being jellybeans in the off-line SMPS designer's stock. |
| Navigation |
| Message Index |