Lady Heather + Raspi Zero + Trueposition - A "For dummies" approach

[tabajaralabs]

Greetings all!

Got my trueposition board, a Raspi Zero (not W) board, a LCD, etc.

I saw a very interesting build on the net (http://www.keteu.org/posts/gpsdo.html), but zero details of integrating this parts. I believe it yould be a very cute benchtop GPSDO with a nice 7" display running Lady Heather
Unfortunately I have ZERO knowledge of Raspi Zero, Raspibian, Linux, whatever. This cannot be a hard build. You connect 3 wires (RX, TX and GND) to the raspi zero, hdmi out to hdmi in of the LCD, power to the peop...ops, to all the boards, load raspibian (or another raspi linux distribuiton), install LH and configure everything. But I just don't know even how do I start.

May I have some help? Maybe a "for dummies" to help everyone? I know this is n00b to the bone, but besides geting etcher and creating a raspibian card, I don't know exactly how to make it work
Thanks! =D

[bingo600]

Start by downloading the linux source for Lady Heather
https://www.eevblog.com/forum/metrology/lady-heather-v6-beta-for-windows-exe/msg3257200/#msg3257200


The source ought to be downloaded from this post
https://www.eevblog.com/forum/metrology/lady-heather-v6-beta-for-windows-exe/msg1434005/#msg1434005

The tinyurl stuff , but it seems not to be working

/Bingo