| Electronics > Projects, Designs, and Technical Stuff |
| Why factory RESET comes during memory bootloading ? HW or SW issue ? |
| (1/1) |
| Md Mubdiul Hasan:
Hi there, I am working a WIFI module as follows, https://www.semiconductorstore.com/cart/pc/viewPrd.asp?idproduct=73461&utm_source=octopart&utm_medium=compref&utm_campaign=OCTPTEC&utm_term=FCM9000SC-100 To activate it, need to download 4 image file like Serial Flash Discoverable Parameter coverage. At the same time I am using a USB to Serial COM port works in 5volt. But, wifi module accepts 3.3v, so I am using TX, RX from USB Serial COM which has 3.3 level also. To maintain 3.3 v for WIFI, an external power supply has used. Not sure, after downloading why factory reset command appears ? For voltage swing ? In Serial terminal error massage says, :palm: SETUP: ERROR(ret=9) All services have been stopped. Please reboot or setup again. [PRADA:NVRAM] reboot ERROR PTIM is relocated to RETMEM (00184110) RaLIB is relocated to RETMEM (00180810) |
| Navigation |
| Message Index |