| Electronics > Projects, Designs, and Technical Stuff |
| Wind and PV charge controller project, best way to skin it? |
| (1/1) |
| bob_volts:
Afternoon All I'm currently in the planning process of designing a PV and wind source battery charger. Its a low input power concept, the PV is 40-50w and the wind will be via an alternator capped at 10 amps all charging a 12v battery . First ever "project", in experience would it be best to build individual PWM controllers for both sources and take them both to the battery? Any help would be appreciated. Bob. |
| Navigation |
| Message Index |