| Electronics > Projects, Designs, and Technical Stuff |
| Yet another resistance decade box |
| << < (25/87) > >> |
| TheAmmoniacal:
No idea what I just paid for, will be fun anyway I guess :-DD |
| all_repair:
Just paid fot 6 pcb set, 1x 0.1% resistor set, 4x1% resistor set, 1xship. Thank you. |
| Fortran:
Update: Only 3 of the 0.1% kits remaining. I've got about 20 of the 1% kits left, and about half a kilo of boards :) I'm in no danger of running out of boards.. |
| garnix:
While I'm waiting for the board&resistors to arrive I'm looking at AliExpress for the remaining needed components (KM2 switches, enclosure-box, banana-socket). While I settled for this switch http://www.aliexpress.com/item/Black-18mm-x-6mm-0-9-Digits-BCD-Code-Pushwheel-Thumbwheel-Switches-KM2/1804257049.html I'm still undecided for the enclosure as I don't exactly know the height of the switch+PCB board - I would like the enclosure to be as small as possible. Has anybody measured the required height? The plain-vanilla switch (according to AliExpress) seems to be 28 mm, but I guess approx. 2-3 mm of it will stick out of the encasing (pushbuttons, frame), so the case needs a minimal "inside" height of approx. 25 mm? |
| Alex Nikitin:
Just paid for 2x 6 pcbs only. Thank you. Cheers Alex |
| Navigation |
| Message Index |
| Next page |
| Previous page |