Electronics > Projects, Designs, and Technical Stuff

Yet another resistance decade box

<< < (25/87) > >>

TheAmmoniacal:
No idea what I just paid for, will be fun anyway I guess :-DD

all_repair:
Just paid fot 6 pcb set, 1x 0.1% resistor set, 4x1% resistor set, 1xship.
Thank you.

Fortran:
Update:
Only 3 of the 0.1% kits remaining.

I've got about 20 of the 1% kits left, and about half a kilo of boards  :)
I'm in no danger of running out of boards..

garnix:
While I'm waiting for the board&resistors to arrive I'm looking at AliExpress for the remaining needed components (KM2 switches, enclosure-box, banana-socket).

While I settled for this switch http://www.aliexpress.com/item/Black-18mm-x-6mm-0-9-Digits-BCD-Code-Pushwheel-Thumbwheel-Switches-KM2/1804257049.html I'm still undecided for the enclosure as I don't exactly know the height of the switch+PCB board - I would like the enclosure to be as small as possible.

Has anybody measured the required height? The plain-vanilla switch (according to AliExpress) seems to be 28 mm, but I guess approx. 2-3 mm of it will stick out of the encasing (pushbuttons, frame), so the case needs a minimal "inside" height of approx. 25 mm?

Alex Nikitin:
Just paid for 2x 6 pcbs only.
Thank you.

Cheers

Alex

Navigation

[0] Message Index

[#] Next page

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod