Electronics > Projects, Designs, and Technical Stuff
Yet another resistance decade box
Back2Volts:
Are all KM2 switches supposed to be the same size? I am asking because the vendor I ordered from lists a KM2 set in white with size 22x8 instead of 18x6. I think getting another set in white for the 0.1% I will be getting would be a nice way to differentiate them.
http://www.ebay.com/itm/10-Pcs-KM2-0-9-Digital-Decimal-Coded-Pushwheel-Switches-White-22mm-x-8mm-/230980234751?hash=item35c77eadff:g:KOwAAOSwjVVVlXPP
PuterGeek:
--- Quote from: Fortran on July 20, 2016, 04:38:56 pm ---No you're not.
But I've sold out and need to order some more resistors.
I should be able to send some more kits around 1/8.
There will be a small adjustment on the price though, since the resistors I ordered last time is no longer in stock.
--- End quote ---
I've thought you were all set with more 0.1% resistors so already sent my money and a PM. Let me know how much more I need to send.
Thanks!
PuterGeek (aka Joe Stockton)
ez24:
--- Quote from: Back2Volts on July 20, 2016, 08:23:07 pm --- I am asking because the vendor I ordered from lists a KM2 set in white with size 22x8 instead of 18x6.
--- End quote ---
Maybe Fortran can move up to 22x8 and since they would be easier to solder (if bigger SMD), he could sell these on a production basis. (until the Chinese make copies). These seem to be a good item to have on a workbench and thus I think there is a market for them (think ebay)
Fortran why don't see if you can earn some money on this venture? (unless you do not need any)
Back2Volts:
--- Quote from: ez24 on July 21, 2016, 03:29:17 am ---
--- Quote from: Back2Volts on July 20, 2016, 08:23:07 pm --- I am asking because the vendor I ordered from lists a KM2 set in white with size 22x8 instead of 18x6.
--- End quote ---
Maybe Fortran can move up to 22x8 and since they would be easier to solder (if bigger SMD), he could sell these on a production basis. (until the Chinese make copies). These seem to be a good item to have on a workbench and thus I think there is a market for them (think ebay)
Fortran why don't see if you can earn some money on this venture? (unless you do not need any)
--- End quote ---
That was not the point I wanted to raise. I am happy with the small size, because I believe, the smaller is the unit the closer to the test breadboard it can be placed, which in cases may be important.
What I was trying (no too well) to ask, is if there is an inconsistency between "KM2" and "22x8". I thought KM2 implied 18x6, but I may have been wrong all along.
Fortran:
My guess is that the seller doesn't really know? :-//
16 or 18 is the correct height.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version