| Electronics > Projects, Designs, and Technical Stuff |
| Yet another resistance decade box |
| << < (44/87) > >> |
| Janne:
Sign me up for a kit of 0.1% :) |
| ez24:
--- Quote from: Fortran on July 21, 2016, 07:54:18 pm ---My guess is that the seller doesn't really know? :-// 16 or 18 is the correct height. --- End quote --- Interesting. I will order the large one and check it against the small one I ordered Edit : I found this large one and ordered it. http://www.ebay.com/itm/10-Pcs-KM3-0-9-Digital-Decimal-Coded-Pushwheel-Switches-Black-31mm-x-10mm-/310668820375?hash=item48554dff97:g:YEcAAOSw9N1VpybP |
| Fortran:
--- Quote from: Janne on July 21, 2016, 08:18:53 pm ---Sign me up for a kit of 0.1% :) --- End quote --- Will do! --- Quote from: ez24 on July 21, 2016, 08:23:04 pm ---Interesting. I will order the large one and check it against the small one I ordered --- End quote --- It won't fit. The board on that one is too big. You can tell from the holes all being in a straight line. On the correct one they go around the edges. Well unless it's a BCD switch. |
| bitseeker:
Got my kits on the West coast. :phew: My first letter from Finland. :popcorn: Thanks again, Fortran. |
| Back2Volts:
--- Quote from: Fortran on July 21, 2016, 07:54:18 pm ---My guess is that the seller doesn't really know? :-// 16 or 18 is the correct height. --- End quote --- I think you are right. The seller has not ever touched or even seen the merchandise. He is located in Hong Kong, but the shipment came direct from Shenzhen. Before ordering I had asked him if he sold the end brackets and he replied no. I was surprised when the black set came with the end brackets. He must be a re-seller that forwards the orders to another outfit. I will order the white ones for the 0.1% set which you will hopefully ship next month. That way the 1% and 0.1% will look different. |
| Navigation |
| Message Index |
| Next page |
| Previous page |