Electronics > Projects, Designs, and Technical Stuff
Yet another resistance decade box
Back2Volts:
--- Quote from: ez24 on July 22, 2016, 08:41:05 pm ---Ebay ?
http://www.ebay.com/itm/20pcs-brass-Banana-Socket-Jack-Binding-Post-FOR-4mm-BANANA-Plug-/151247841828?hash=item233712ea24:g:gDYAAOxy0NtTF7hM
--- End quote ---
Those could possible be mounted on a side with relatively less increase of the box size because it seems a large part of the piece is on the outside.
bitseeker:
--- Quote from: smgvbest on July 22, 2016, 08:51:57 pm ---Made a few updates, still basically the same but the front and back panels are now replaceable so different combinations can be done.
--- End quote ---
Cool. One adjustment to the front-panel label: "MOhm" instead of "mOhm". Lowercase 'm' is milli- vs. capital 'M' being mega-.
--- Quote ---This box isn't going to make everyone happy. this is as flexible as possible and stable.
--- End quote ---
Nothing makes everyone happy. This is good and can be further modified by someone to suit their individual needs.
ez24:
Is someone making a case for these switches for sale? Or is the talk just about personal cases?
gblades:
My switches arrived today and I soldered and assembled them. The pcb's are a perfect snug fit.
smgvbest:
--- Quote from: bitseeker on July 22, 2016, 09:44:05 pm ---Cool. One adjustment to the front-panel label: "MOhm" instead of "mOhm". Lowercase 'm' is milli- vs. capital 'M' being mega-.
--- End quote ---
Thanks for the catch, fixed it
Quick edit
Here's case with a 6 decade (as ordered from Fortran.
Another edit:
here are 2 stl files,
1. for a 6 decade with endcaps
1. for a 10 decade with endcaps
Had to zip them as the site doesn't permit stl files
if anyone wants to do a test fit that has a 3d printer let me know how they fit
since its a test a 30% or less infill would be recommended to save filament and time.
hopefully my hotend will be here Saturday or Monday
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version