| Electronics > Projects, Designs, and Technical Stuff |
| Yet another resistance decade box |
| << < (19/87) > >> |
| Fortran:
I second what Peter said. It's never going to be a high-end product. But with a new board it's probably good enough for most hobbyists. It will definitely be good enough for most beginners! And for the price of 1USD for 6 boards, complaints isn't an option. I've poured a few hundred bucks into this already just because I like the idea, with basically zero margin. If I don't sell enough of them I'll loose money. If you want a professional device, spend the extra 500USD or so and get one. This is basically putting makeup on a pig, and should be treated as such. But for what you're paying.. it's quite an attractive pig :) |
| m100:
--- Quote from: linux-works on June 21, 2016, 07:19:56 pm --- they make larger style thumbwheels. --- End quote --- Indeed they do, but ten KM2 switches cost me about GBP 4 delivered. Larger switches from recognised suppliers and distributed by Farnell in the UK are around GBP 20 each http://uk.farnell.com/crouzet-automation/84210054/switch-decade/dp/143617 At GBP 120 just for switches on a six decade box such a project would be a non starter for me especially when I could buy a significantly larger form factor one fully assembled and off the shelf for GBP 100 http://uk.rs-online.com/web/p/decade-boxes/3826439/ or for those with much deeper pockets an IET Labs one for GBP 600 http://uk.farnell.com/iet-labs/rs-200w/resistance-decade-box-0-99999999/dp/9769765 or a Time Electronics one for roughly the same GBP 600 http://uk.farnell.com/time-electronics/1040/resistance-box/dp/5058284 |
| linux-works:
I understand the original motivation and yes, after 4 pages and talk of group buys, its gone beyond one guy who has a surplus of parts he wanted to get use out of. that said, if people have put money in, it would not be fair to leave them; and so I would continue to support the project and buy my reserved boards so that the organizers don't lose money. |
| bitseeker:
Yep, I like this little one because the size and cost are good for tinkering. I got a used IET box for long-term, "serious" use (and higher wattage). It's all good. |
| all_repair:
I am going to throw a few into my site-work bag, and a few in the lab when testing some process meter. Save me finding, filing or buying loose resistors for setup need. Yes, I do have a tank-like decade box. |
| Navigation |
| Message Index |
| Next page |
| Previous page |