Author Topic: ERC error +5v to GND  (Read 8721 times)

0 Members and 1 Guest are viewing this topic.

Offline lkTopic starter

  • Regular Contributor
  • *
  • Posts: 152
  • Country: dk
ERC error +5v to GND
« on: December 26, 2017, 06:01:36 pm »
Greetings,
Im building a Z80 SBC based off Grant Searle's design
http://searle.hostei.com/grant/z80/SimpleZ80_32K.html

I have previously build his 6502 design, however with this one i have run into a ERC error that tells me that i have a short between the +5v rail and ground, and now i have been, looking at this for hours and cant seem to find what is wrong :)
Its most likely something simple.

The design is included. Proteus 8.7.

-lasse

Posted in the labcenter forum as well, but they are on vacation this week, so i will try here :)
 

Offline lkTopic starter

  • Regular Contributor
  • *
  • Posts: 152
  • Country: dk
Re: ERC error +5v to GND
« Reply #1 on: December 26, 2017, 10:40:27 pm »
The guys at labcenter to my rescue,

turns out that i had a hidden wire under U3, dont know how it got there, but removing it solved the problem.

-lasse
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf